Select Your Language

Versandkostenfrei ab € 200

Skreddy Pedals - BC109

From thin and buzzy to clear and cutting to rich and thick and syrupy

Schreiben Sie die erste Kundenmeinung

Lieferzeit: Auf Lager - Versand in 24 Stunden

235,00 €
Inkl. 16% MwSt., zzgl. Versandkosten

Classic Fuzz Tones


The Skreddy Pedals™ BC109 FUZZ  is made from silicon transistors for power and temperature stability, but it's darkened so you can get germanium-ish effects out of it too.



The 2 transistors are piggybacked for better tone (smoother, lower noise than single transistors), giving this circuit 4 transistors total.



The extra controls let you emulate different classic fuzz tones from the 60's and early 70's along with improvements for some of the issues those early fuzzes had (noise reduction, adjustable tone, and input impedance selector switch).  Can get frazzly or smooth, bright or dark.



This is a rude, biting fuzz that does not totally clean up with the volume knob; at very low guitar volume it's still slightly gritty sounding.  So it's not one of those "leave on all the time" fuzzes; it's more of a "stomp for mayhem" type of fuzz!  It's not just another Fuzz Face™ clone; it's more like a fuzz on steroids.


From thin and buzzy to clear and cutting to rich and thick and syrupy

 

Selectable input resistance lets it work great with humbuckers and get along with other effects too...

 

Stable at all temperatures but very sensitive to guitar volume knob changes

Just leave the fuzz knob cranked or backed down a touch

True bypass, LED, standard 9v power jack

Ripping High Gain Oldschool Fuzz



Adjustable but not refined—an angry, raw, vintage-style 2-transistor fuzz with extra controls and tweaks to let you recreate oodles of classic fuzz sounds with minimum hassle



Adjustable but not too modernized—a vintage-style 2-transistor fuzz with extra controls and tweaks to let you recreate oodles of classic fuzz sounds with minimum hassle It's a silicon fuzz for power and temperature stability, but darkened so you can get germanium-ish effects out of it too. The 2 transistors are piggybacked for better tone and lower noise, giving this circuit 4 transistors total.

This VOLUME control gives you a LOT more output volume than most classic fuzzes, with unity gain at or below noon and plenty of boost beyond that.

The BIAS control lets you go from soft, buzzy, and low-fi to hard, loud, and clear. Sometimes also referred to as a "MIDS" control since it does affect the midrange content too.

The VOICE control lets you go from bright and articulate to smooth and syrupy. It's really nothing more than an extra guitar tone control.

This fuzz sounds so sweet with the tone rolled down that you will love having this dedicated control right where it's at, freeing up the guitar's

tone control setting for all your other applications.

The FUZZ knob is the control that sets the gain for this whole thing. Most fuzzes of this type sound best with the fuzz turned either all the way up or dialed back just a touch from max.

The HB / SC switch adds a bit of resistance to the input in order to keep a humbucker pickup from swamping the circuit and causing it to have a gated attack. Also switches the sound to a lower-gain, slightly milder fuzz tone. But it's useful for helping this fuzz work together with other effects (like to keep a wah pedal from making that siren sound you get from driving it into a vintage-style fuzz, or that extreme, trebly, noisy fuzz you get if you run an active buffer or booster in front of a fuzz).

Power

Do not share power with a daisy chain. Not because that would fry anything, but just because this circuit is very sensitive to ground-loop hum. In other words, it will create extra noise. It is typical, normal negative-ground, though; no special power requirements.

9v battery is not included. To install or change a battery, remove the bottom cover using a Phillips screw driver. To prevent a battery (if

you use one) from draining while the pedal is not in use, remember to un-plug the input cable from the pedal’s input jack. The battery is also

disconnected from the circuit when an adapter is plugged into the DC jack.

Power consumption: 1mA @ 9v

You may supply external power through an AC adapter. All Skreddy Pedals accept the industry-standard 9v DC plug (5.5mm barrel x

2.1mm center coax), negative tip. Please use a quality, regulated, filtered power supply (not included).

Zusatzinformation

Marke Skreddypedals

Kundenmeinungen

Schreiben Sie Ihre eigene Kundenmeinung

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich