+49 711 95832052
Warenkorb
Sprache
deutsch
Navigation umschalten
Suche
Erweiterte Suche
Menü
Konto
Einstellungen
Sprache
deutsch
  • Marken: KMA Audio Machines

KMA Machines Active STEREO ABY

Stereo Omnidirectional AB-Y box with Buffer and 180° Phase switch.
Seien Sie der erste, der dieses Produkt bewertet
139,00 €
Inkl. 19% deutscher MwSt. (kann je nach Bestimmungsland variieren, finaler Preis wird beim Checkout angezeigt), , zzgl. Versand
Lieferzeit
Auf Lager - Versand innerhalb 24 Stunden
Zur Wunschliste hinzufügen
E-Mail an einen Freund
main product photo

English Version below.

Allgemeine Sicherheitshinweise

• Bevor Sie das Gerät in Betrieb nehmen drehen Sie bitte alle Regler auf Minimum bzw. auf „Null“.

• Lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen.

• Bewahren Sie die Bedienungsanleitung für zukünftige Referenz auf.

•Verwenden Sie das Gerät nur für den vorgesehenen Zweck.

• Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern.

• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.

Elektrische Sicherheit

• Vergewissern Sie sich, dass die Netzspannung mit den Angaben auf dem Gerät übereinstimmt.

•Verwenden Sie nur das mitgelieferte Netzteil oder ein gleichwertiges, von einem Fachmann empfohlenes Netzteil.

• Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt wird.

• Schützen Sie das Netzkabel vor Beschädigungen.

• Verwenden Sie das Gerät nicht, wenn das Netzkabel beschädigt ist.

• Vermeiden Sie den Kontakt des Geräts mit Wasser oder anderen Flüssigkeiten, um das Risiko eines elektrischen Schlages zu minimieren.

Hinweise zur Reparatur

• Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.

• Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren, da dies zu schweren Verletzungen oder Schäden am Gerät führen kann.

• Bei Funktionsstörungen oder Defekten wenden Sie sich an einen autorisierten Service-Techniker oder an uns. info@effekt-boutique.de

Warnhinweise

• Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile.

• Stellen Sie sicher, dass die Lüftungsschlitze des Geräts nicht blockiert sind, um Überhitzung zu vermeiden.

• Verwenden Sie das Gerät nicht in der Nähe von entflammbaren Materialien oder Flüssigkeiten.

• Ziehen Sie bei Gewitter oder längeren Betriebspausen den Netzstecker, um mögliche Schäden durch Spannungsspitzen zu vermeiden.

• Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder anderen Wärmequellen aus.

• Essen Sie keinen gelben Schnee

English

General safety instructions

• Before you start using the device, please turn all controls to minimum or “zero”.

• Read the operating instructions carefully before using the device.

• Save the instruction manual for future reference.

•Use the device only for its intended purpose.

• Keep the device away from water, moisture and extreme temperatures.

• Keep the device out of the reach of children.

Electrical safety

• Make sure that the mains voltage matches the information on the device.

•Use only the included power adapter or an equivalent power adapter recommended by a professional.

• Unplug the device if the device is not going to be used for a long period of time.

• Protect the power cord from damage.

• Do not use the device if the power cord is damaged.

• Avoid contact of the device with water or other liquids to minimize the risk of electric shock.

Repair instructions

• Repairs may only be carried out by qualified specialist personnel.

• Do not attempt to open or repair the device yourself as this may result in serious injury or damage to the device.

• In the event of malfunctions or defects, contact an authorized service technician or us. info@effekt-boutique.de

Warnings

• Do not open the device. It contains no user-serviceable parts.

• Make sure the device's ventilation slots are not blocked to avoid overheating.

• Do not use the device near flammable materials or liquids.

• During thunderstorms or long breaks in operation, pull out the power plug to avoid possible damage caused by voltage peaks.

• Do not expose the device to direct sunlight or other heat sources.

• Don't eat yellow snow

Hersteller / Manufacterer:
KMA Machines
Tabbertstr. 10-11
12459 Berlin
Germany
support@kma-machines.com
https://kmamachines.com/

KMA Machines Active STEREO ABY Consistent Active Connectivity, in Stereo

There’s nothing new about ABY boxes. They’re a very commonly used accessory and a staple part of many setups out there. But if they are so common, then (until we launched our passive Stereo ABY) why was it so difficult to find one in a stereo format that’s well built, noise-free AND affordable? This is a question we kept encountering as we use many stereo devices daily here at KMA, plus we know that a lot of users are just as mesmerised by the wide sonic worlds of stereo as we are. So, we made a killer stereo ABY switcher to use here at our workshop. In the process we found it so useful, so we decided to make the original STEREO ABY available to the world too in a pedal format.

However, despite our passive boxes gracing thousands of rigs the world over, the Active STEREO ABY takes things a little further and is ideal for those who like to use the Y splitting or combining functions - at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help eliminate level mismatches or even signal loss, if used with long cable runs.

Whether you’re looking to switch or combine a Stereo input signal between two separate destinations or switch or combine two separate Stereo input signals into a single stereo output without signal loss, the KMA Machines Active STEREO ABY pedal is a dependable little helper for your tonal quest - the fate of your Stereo signals is in your hands!  

Main Features

• Active Stereo / Dual-Mono ABY pedal

• Sends a Stereo input to two separate stereo outputs, separately or combined via regular ¼ inch/6.35mm Jacks

• Sends two Stereo inputs to one stereo source, separately or combined

• 180° Phase switch, helps to remove mismatches

• Active silent CMOS-based soft switching, heavily reduces mechanical noise with virtually silent signal bypass

• Omnidirectional for 2 into 1 or 1 into 2 operations

• A&B>Y or Y>A&B switch, allows for precise directionality

• Distinct LED colours, to indicate your selected signal path at a glance

• Durable compact enclosure for years of reliable switching

• Top-mounted jacks, will fit into any setup

• Made in Berlin, Germany

• Power by opt. 9 V PSU (9 V DC, centre -, 2.1 mm, >55 mA max. current draw)

KMA’s ABY Series has been created with a focus on durability, reliability, simplicity and hassle-free operation.

The Active ABY pedal features a fully active design along with our active silent CMOS switching. While that might be a hell of a wordy mouthful (or even sound scary to some), what it means practically is that the pedal is completely silent in operation. This has the added benefit of allowing for all sorts of hookups helping to prevent signal loss. Being active, it can also minimise any potential level mismatch between hookups. It can be electronically difficult to achieve this kind of switching without interference between the switching and signal paths, but by employing our own implementation of this switching technology, not only are the mechanical switching noises greatly reduced, but the risk of any pesky loud clicks and pops that has plagued so many boards and has haunted so many musicians, since the inception of ABY boxes when switching, is virtually eliminated.

The bears eyes light up - how awesome is that!? Okay, besides just looking cool and fulfilling our childhood dreams of an army of robot bears with freaking lasers as eyes, the 3 distinct LEDs in the Active ABY actually serve a practical purpose; to quickly and easily show you what signal path you’ve selected at a glance. Red for A, Yellow for B and Blue in the centre for A&B.

With the A&B>Y or Y>A&B switch you can use the device in either direction, for sending to different sets of amps, synths or effects or for switching inputs/ instruments/ devices into your chain via the Y channel, for even more creative combining or splitting. While the Phase switch allows for flipping the A Channel by 180°. This can prevent signal cancellation and tone issues that can happen in some setups when combining or splitting signals.

This pedalboard-friendly device seamlessly integrates with your existing setup. It's compact, rugged, lightweight, durable, affordable and can be powered via a standard 9V DC power supply, making it convenient for all walks of sonic life. What’s not to like?

So, will you choose A or B? With the KMA Machines Active STEREO ABY pedal, all you have to do is choose your path and perform!

Mehr Informationen

Mehr Informationen
Marke KMA Audio Machines

Bewertungen

Eigene Bewertung schreiben
Nur eingetragene Benutzer können Rezensionen schreiben. Bitte einloggen oder erstellen Sie einen Account