• Marken: Crazy Tube Circuits

Crazy Tube Circuits - Venus Tube Overdrive

Venus is a real tube overdrive inspired by one of the greatest masterpieces of the pedal museum.
299,00 €
Inkl. 19% deutscher MwSt. (kann je nach Bestimmungsland variieren, finaler Preis wird beim Checkout angezeigt), , zzgl. Versand
Lieferzeit
Auf Lager - Versand innerhalb 24 Stunden
Lieferdatum
20.05.2025

Venus is a real tube overdrive inspired by one of the greatest masterpieces of the pedal museum.

With ultimate versatility and tone shaping in mind, we set out to recreate a classic tube tone sculpture with modern refinements, generating anything from a smooth, light tube overdrive, to a high-gain, nasty distortion within the realm of fuzz.

First of all, size matters! Without sacrificing tone, we squeezed our circuit into the smallest possible enclosure, measuring 12.6 x 6.6 x 5.7 cm (L x W x H). Instead of an internal step-down power transformer, we designed Venus to operate from a standard 9V DC power supply to minimize background noise and hum. The user can operate the pedal from the included power supply or any isolated 9V DC, center-negative power supply output with 500mA current capability. Then a properly designed internal voltage booster/inverter circuit provides the correct voltage conditions (symmetrical +/- 15V DC).

While the classic masterpiece that inspired Venus originally shipped with an ECC83 (12AX7) dual triode tube, users looking for a smoother, cleaner sound replaced the tube with a lower gain/higher headroom variant like ECC81 (12AT7) or ECC82 (12AU7). With that in mind, we selected an ECC832 tube as stock for Venus. This kind of oddball tube features half of an ECC83 and half of an ECC82. The tone is as close as possible to the original “tube sculpture” but with more clarity, string separation and a wider soundstage.

You can still substitute with all the "usual suspects" of dual triode tube types like ECC83/12AX7, 5751, ECC81/12AT7, 12AY7, ECC82/12AU7 for a different sonic flavor. Use the bias knob to set the tube bias/control the current passing through the tube cathodes. By adjusting this knob, you can find the sweet spot for different tube types used and/or set the texture of the overdrive / distortion: from gnarly, nasty and gated (counter-clockwise) to smooth and creamy (clockwise). The full clockwise setting of the bias knob has the cleanest sound for most tube types used.

A full 3-band EQ gives you total control over frequency response. With the mid control, you can sweep through the sounds of all the variants of the unit that inspired Venus and also comes in especially handy if you are using slightly mid-scooped clean amps. To sculpt the tone further and match the pedal to different guitars and/or pickups, we have also added a push switch to set the amount of low and low-mid frequencies boost that hits the tube gain stages between the stock fat or tight sound (when pushed in). A switchable low-output-impedance line driver (buffer/volume booster) ensures that your signal gets properly pushed through to the next pedal or your amp, and all your audio frequencies are retained. The bypass state of Venus is always true bypass regardless of this push button switch setting. The selectable line driver is only placed at the output of the effect when engaged.

 

Power: 9VDC center negative, minimum 400 mah (not included)

Mehr Informationen
Marke Crazy Tube Circuits
Lieferdatum 20.05.2025
Eigene Bewertung schreiben
Nur eingetragene Benutzer können Rezensionen schreiben. Bitte einloggen oder erstellen Sie einen Account

English Version below.
Allgemeine Sicherheitshinweise
• Bevor Sie das Gerät in Betrieb nehmen drehen Sie bitte alle Regler auf Minimum bzw. auf „Null“.
• Lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen.
• Bewahren Sie die Bedienungsanleitung für zukünftige Referenz auf.
•Verwenden Sie das Gerät nur für den vorgesehenen Zweck.
• Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern.
• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
Elektrische Sicherheit
• Vergewissern Sie sich, dass die Netzspannung mit den Angaben auf dem Gerät übereinstimmt.
•Verwenden Sie nur das mitgelieferte Netzteil oder ein gleichwertiges, von einem Fachmann empfohlenes Netzteil.
• Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt wird.
• Schützen Sie das Netzkabel vor Beschädigungen.
• Verwenden Sie das Gerät nicht, wenn das Netzkabel beschädigt ist.
• Vermeiden Sie den Kontakt des Geräts mit Wasser oder anderen Flüssigkeiten, um das Risiko eines elektrischen Schlages zu minimieren.
Hinweise zur Reparatur
• Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
• Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren, da dies zu schweren Verletzungen oder Schäden am Gerät führen kann.
• Bei Funktionsstörungen oder Defekten wenden Sie sich an einen autorisierten Service-Techniker oder an uns. info@effekt-boutique.de
Warnhinweise
• Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile.
• Stellen Sie sicher, dass die Lüftungsschlitze des Geräts nicht blockiert sind, um Überhitzung zu vermeiden.
• Verwenden Sie das Gerät nicht in der Nähe von entflammbaren Materialien oder Flüssigkeiten.
• Ziehen Sie bei Gewitter oder längeren Betriebspausen den Netzstecker, um mögliche Schäden durch Spannungsspitzen zu vermeiden.
• Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder anderen Wärmequellen aus.
• Essen Sie keinen gelben Schnee
English
General safety instructions
• Before you start using the device, please turn all controls to minimum or “zero”.
• Read the operating instructions carefully before using the device.
• Save the instruction manual for future reference.
•Use the device only for its intended purpose.
• Keep the device away from water, moisture and extreme temperatures.
• Keep the device out of the reach of children.
Electrical safety
• Make sure that the mains voltage matches the information on the device.
•Use only the included power adapter or an equivalent power adapter recommended by a professional.
• Unplug the device if the device is not going to be used for a long period of time.
• Protect the power cord from damage.
• Do not use the device if the power cord is damaged.
• Avoid contact of the device with water or other liquids to minimize the risk of electric shock.
Repair instructions
• Repairs may only be carried out by qualified specialist personnel.
• Do not attempt to open or repair the device yourself as this may result in serious injury or damage to the device.
• In the event of malfunctions or defects, contact an authorized service technician or us. info@effekt-boutique.de
Warnings
• Do not open the device. It contains no user-serviceable parts.
• Make sure the device's ventilation slots are not blocked to avoid overheating.
• Do not use the device near flammable materials or liquids.
• During thunderstorms or long breaks in operation, pull out the power plug to avoid possible damage caused by voltage peaks.
• Do not expose the device to direct sunlight or other heat sources.
• Don't eat yellow snow

Hersteller / Manufacterer:
Crazy Tube Circuits
11 Orestiados str
16232 Vironas
Athens
Greece
(+30) 213 004 53 87
info@crazytubecircuits.com
www.crazytubecircuits.com

Imported by
Face BV
Hoek 76 Unit 301
2850 Boom
Belgium
(+32) 3 844 67 97
info@face-be.eu
www.face-be.eu