Ghost Note Audio - Vader 140 preamp
Aggressive and focused. Another legendary circuit, the VH-140 utilized a novel gain stage design which was patented by Ampeg in the late 80's. Consisting of back-to-back zener clipping diodes, and a novel "dynamic bias" feature, the design produces an extremely hard clipping result, with lots of harmonics, and lots of gain.
About Preamplifiers
This is a preamplifier, and not a distortion pedal. We do not recommend connecting this device to the input of a normal guitar amplifier. Instead, it is best used in one of the following ways:
Connected to the Effects Return / Power Amp Input of a guitar amp
Connect your guitar to the pedal input, and connect the pedal output to the effects return. This bypasses your amplifier's built-in preamp, and the signal goes through the pedal instead.
Connected to a dedicated power amp
Some examples include the Seymour Duncan Powerstage, Harley Benton GPA-100, or the Mooer Baby Bomb.
Connect the pedal directly to an audio interface
For recording purposes, the pedal can be connected to either an instrument or line-level input on your audio interface. Using a speaker cabinet simulation plugin, such as an Impulse Response (IR) loader, to emulate the effect of a speaker cab is highly recommended.
Controls
Gain - The main gain control for the preamp.
Bass, Mid, Treble - Active 3-band equalizer.
Volume - Controls the output signal amplitude.
Presence - The original amplifier was rather muffled, due to an aggressive roll-off of high frequencies in the tone control circuitry. We've added two more options to reduce or eliminate this roll-off, resulting in a much more open and bright sound. Keep it in the Up position to retain the original sound.
Shift - Shifts the centre frequency of the Mid band for a more "traditional" sounding tone circuit.
Active Switch - Engages or bypasses the pedal with a relay (true bypass).
The original
The Ampeg VH-140C emerged in the late '80s, around 1987, to be precise. Ampeg, primarily known for their bass amps, decided to step into the guitar world with this amplifier, and what a statement it made. One of the standout features of the VH-140C is its extreme gain capability. The gain on this amp can be dialed up to levels that border on insanity, delivering a wall of distortion that's perfect for churning out those crushing, heavy riffs that define death metal. It's the kind of distortion that can peel paint off walls and make your neighbors question their life choices.
The amp's tonal signature is often described as thick, saturated, and aggressive. It's not just about the gain, though; the VH-140C has a unique midrange character that cuts through the mix.
While it found fame in death metal circles, its versatile nature made it suitable for a range of genres. From thrash metal to hard rock, the VH-140C proved itself as a versatile workhorse that could handle a variety of playing styles.
As with many iconic pieces of gear, the Ampeg VH-140C developed a cult following over the years. Despite being discontinued, it remains sought after in the second-hand market by guitarists eager to capture that classic death metal tone. The scarcity of these amps only adds to their allure, turning them into prized possessions for those lucky enough to own one.
Features
True Bypass with Relay switching.
Soft-touch footswitches.
Internal voltage-boost mechanism ensures circuit runs at same voltage as the original amp.
Rugged 16 gauge (1.6mm) steel enclosure with textured powder coat finish.
Solid aluminium knobs.
Technical Specs
Power Requirement: 9V DC, 170mA, powersupply not included
Power connector: 2.1mm center-negative barrel jack
Dimensions: 145mm (W) 108mm (D) 61mm (H)
Dimensions (with packaging): 185mm (W) 130mm (D) 70mm (H)
| Marke | Ghost Note Audio |
|---|
English Version below.
Allgemeine Sicherheitshinweise
• Bevor Sie das Gerät in Betrieb nehmen drehen Sie bitte alle Regler auf Minimum bzw. auf „Null“.
• Lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen.
• Bewahren Sie die Bedienungsanleitung für zukünftige Referenz auf.
•Verwenden Sie das Gerät nur für den vorgesehenen Zweck.
• Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern.
• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
Elektrische Sicherheit
• Vergewissern Sie sich, dass die Netzspannung mit den Angaben auf dem Gerät übereinstimmt.
•Verwenden Sie nur das mitgelieferte Netzteil oder ein gleichwertiges, von einem Fachmann empfohlenes Netzteil.
• Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt wird.
• Schützen Sie das Netzkabel vor Beschädigungen.
• Verwenden Sie das Gerät nicht, wenn das Netzkabel beschädigt ist.
• Vermeiden Sie den Kontakt des Geräts mit Wasser oder anderen Flüssigkeiten, um das Risiko eines elektrischen Schlages zu minimieren.
Hinweise zur Reparatur
• Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
• Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren, da dies zu schweren Verletzungen oder Schäden am Gerät führen kann.
• Bei Funktionsstörungen oder Defekten wenden Sie sich an einen autorisierten Service-Techniker oder an uns. info@effekt-boutique.de
Warnhinweise
• Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile.
• Stellen Sie sicher, dass die Lüftungsschlitze des Geräts nicht blockiert sind, um Überhitzung zu vermeiden.
• Verwenden Sie das Gerät nicht in der Nähe von entflammbaren Materialien oder Flüssigkeiten.
• Ziehen Sie bei Gewitter oder längeren Betriebspausen den Netzstecker, um mögliche Schäden durch Spannungsspitzen zu vermeiden.
• Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder anderen Wärmequellen aus.
• Essen Sie keinen gelben Schnee
English
General safety instructions
• Before you start using the device, please turn all controls to minimum or “zero”.
• Read the operating instructions carefully before using the device.
• Save the instruction manual for future reference.
•Use the device only for its intended purpose.
• Keep the device away from water, moisture and extreme temperatures.
• Keep the device out of the reach of children.
Electrical safety
• Make sure that the mains voltage matches the information on the device.
•Use only the included power adapter or an equivalent power adapter recommended by a professional.
• Unplug the device if the device is not going to be used for a long period of time.
• Protect the power cord from damage.
• Do not use the device if the power cord is damaged.
• Avoid contact of the device with water or other liquids to minimize the risk of electric shock.
Repair instructions
• Repairs may only be carried out by qualified specialist personnel.
• Do not attempt to open or repair the device yourself as this may result in serious injury or damage to the device.
• In the event of malfunctions or defects, contact an authorized service technician or us. info@effekt-boutique.de
Warnings
• Do not open the device. It contains no user-serviceable parts.
• Make sure the device's ventilation slots are not blocked to avoid overheating.
• Do not use the device near flammable materials or liquids.
• During thunderstorms or long breaks in operation, pull out the power plug to avoid possible damage caused by voltage peaks.
• Do not expose the device to direct sunlight or other heat sources.
• Don't eat yellow snow
Hersteller / Manufacterer:
Ghost Note Engineering Ltd
Unit 74, Basepoint Centre
Metcalf Way
RH11 7XX
Crawley
United Kingdom
https://ghostnoteaudio.uk/
tel: 07429074304
Imported by
Effektboutique
Riedstrasse 9
73760 Ostfildern / Germany
Tel: 0711 9583 2052
info@effekt-boutique.de
www.effekt-boutique.de
WEEE: DE 18974931