Old Blood Noise Endeavors Sunlight Stereo Modulated Reverb
Old Blood Noise Endeavors Sunlight Stereo Modulated Reverb Pedal Combining elements of the popular Sunlight and Procession pedals, Old Blood Noise Endeavors is proud to introduce Sunlight Stereo, the latest in the brand’s upgraded lineup of modern classic sound machines. Focusing mostly on post-reverb processing and motion, Sunlight Stereo sends its reverb through a short delay, filter and volume control, with an LFO available to modulate any and all of those parameters. This helps to create more than reverb, with flanging, chorusing, moving filters and tremolo tones all on offer. Add a dynamic element, stereo processing, low noise floor, full MIDI control and presets and suddenly you have a reverb pedal that is unique yet versatile enough to add to your library of ambient machines. From bright, sharp and pulsing to percussive and even plain weird (moving literally and emotionally), Sunlight Stereo is a reverb pedal that’s sure to conjure up a wealth of imaginative soundscapes.
Main Features:
• The next evolution of OBNE’s Sunlight - Modulated Reverb Pedal
• Stereo Input and Output, with the option for Mono or Mono-in-Stereo-out routing • Dedicated knobs to control Decay Length, Envelope Functionality, Delay Time and Feedback, Filter Frequency, Dry and Wet volume, and Rate, Depth and Shape
• Destination controls for the built-in LFO
• Aux footswitch for tap tempo, indefinitely held trails, or preset switching
• Expression and MIDI control over all parameters
• Onboard Presets, plus control via MIDI
• MIDI clock in and out for external tempo switching
• Analog Dry-Through
• Selectable Buffered Trails or True Bypass modes • Top-mounted jacks and Soft-Touch Switching
• Hand-made in Oklahoma, USA
• Powered by (opt.) 9 V DC PSU , (centre -, 2.1mm, ~ 350 mA current draw, not included)
By adding Stereo Input and Outputs via TRS, on-board Presets, Trails, Expression control over all parameters and MIDI control, this helps to give more versatility to the sound of Sunlight than ever before.
In addition, the Dynamics control introduces moving elements to the reverb, such as LFO variation depending on signal strength at lower settings. When set above noon, additional dynamic elements are introduced to the Reverb and only signals above a certain threshold are let in, meaning the decay of the reverb is decreased at the same time, to clear out existing trails. Essentially, the further you crank up the Dynamics, the more the threshold is increased, requiring louder signals to enter the reverb. You can tune this to the specific strength of your instrument and playing style, in order to create dynamic pads with Decay all the way up.
The Sunlight’s Aux footswitch can be customised for momentary or latching effects, like tap tempo, infinite sustain, reverb hold or preset switching, providing flexible creative control at your feet. Save and switch between three unique on-board presets, with clear LED indicators and use the Expression Jack for hands-free dynamic control over any parameter. Adding to the pedal’s extensive flexibility, Sunlight Stereo is fully MIDI compatible, with presets being selectable via Program Change messages as well as all parameters being accessible and controllable via CC.
With both Mono and Stereo routing options, plus selectable True-Bypass or Trails modes, Sunlight offers a comprehensive blend of both intuitive and advanced features for musicians that are looking to sculpt their own immersive sonic landscapes.
| Marke | Old Blood Noise Endeavours |
|---|
English Version below.
Allgemeine Sicherheitshinweise
• Bevor Sie das Gerät in Betrieb nehmen drehen Sie bitte alle Regler auf Minimum bzw. auf „Null“.
• Lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen.
• Bewahren Sie die Bedienungsanleitung für zukünftige Referenz auf.
•Verwenden Sie das Gerät nur für den vorgesehenen Zweck.
• Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern.
• Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf.
Elektrische Sicherheit
• Vergewissern Sie sich, dass die Netzspannung mit den Angaben auf dem Gerät übereinstimmt.
•Verwenden Sie nur das mitgelieferte Netzteil oder ein gleichwertiges, von einem Fachmann empfohlenes Netzteil.
• Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt wird.
• Schützen Sie das Netzkabel vor Beschädigungen.
• Verwenden Sie das Gerät nicht, wenn das Netzkabel beschädigt ist.
• Vermeiden Sie den Kontakt des Geräts mit Wasser oder anderen Flüssigkeiten, um das Risiko eines elektrischen Schlages zu minimieren.
Hinweise zur Reparatur
• Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
• Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren, da dies zu schweren Verletzungen oder Schäden am Gerät führen kann.
• Bei Funktionsstörungen oder Defekten wenden Sie sich an einen autorisierten Service-Techniker oder an uns. info@effekt-boutique.de
Warnhinweise
• Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile.
• Stellen Sie sicher, dass die Lüftungsschlitze des Geräts nicht blockiert sind, um Überhitzung zu vermeiden.
• Verwenden Sie das Gerät nicht in der Nähe von entflammbaren Materialien oder Flüssigkeiten.
• Ziehen Sie bei Gewitter oder längeren Betriebspausen den Netzstecker, um mögliche Schäden durch Spannungsspitzen zu vermeiden.
• Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder anderen Wärmequellen aus.
• Essen Sie keinen gelben Schnee
English
General safety instructions
• Before you start using the device, please turn all controls to minimum or “zero”.
• Read the operating instructions carefully before using the device.
• Save the instruction manual for future reference.
•Use the device only for its intended purpose.
• Keep the device away from water, moisture and extreme temperatures.
• Keep the device out of the reach of children.
Electrical safety
• Make sure that the mains voltage matches the information on the device.
•Use only the included power adapter or an equivalent power adapter recommended by a professional.
• Unplug the device if the device is not going to be used for a long period of time.
• Protect the power cord from damage.
• Do not use the device if the power cord is damaged.
• Avoid contact of the device with water or other liquids to minimize the risk of electric shock.
Repair instructions
• Repairs may only be carried out by qualified specialist personnel.
• Do not attempt to open or repair the device yourself as this may result in serious injury or damage to the device.
• In the event of malfunctions or defects, contact an authorized service technician or us. info@effekt-boutique.de
Warnings
• Do not open the device. It contains no user-serviceable parts.
• Make sure the device's ventilation slots are not blocked to avoid overheating.
• Do not use the device near flammable materials or liquids.
• During thunderstorms or long breaks in operation, pull out the power plug to avoid possible damage caused by voltage peaks.
• Do not expose the device to direct sunlight or other heat sources.
• Don't eat yellow snow
Hersteller / Manufacterer:
Old Blood Noise Endeavors
400 Sw 25th St, STE B
Oklahoma City, OK 73109
USA
contact@oldbloodnoise.com
https://oldbloodnoise.com/
Imported by
Audio DIstribution Group ApS
Nordlandsvej 90C,
8240, Risskov
DENMARK
gpsr@audiodistributiongroup.com